STYLE: Reversible, zipper front with outside & inside storm fly, removable hood with visor, badge eyelets, two slash pass-through pockets, reflective tape, 49 average length. FABRIC: Shell Contents: Yellow = 100% polyester, oxford, 150 denier with 1,000 mm white back urethane coating Black = 100% polyester, oxford, 150 denier with 600 mm clear back urethane coating ANSI/ISEA 107-2004 Class 3 compliant COLORS: #586MFL black reversing to fluorescent yellow (with reflective tape) FRONT: Five (5) plastic, heavy duty front snap closure, black, with both inside and outside storm flys. REFLECTIVE FABRIC: There shall be 2 wide silver reflective fabric sewn on and seam sealed as follows onto the yellow side: ï‚· Around the chest ï‚· Around the upper arm aligned with chest tape ï‚· Around the hips ï‚· Around the sleeves aligned with the hip tape ï‚· Over each shoulder beginning at the top of the front chest tape, over the shoulder and ending at the top of the back chest tape. BADGE TAB: There shall be badge eyelets affixed to the left breast. They shall be spaced 1 ¼ apart.2 POCKETS: There shall be two (2) slash, single welt pass through type pockets on each side. They shall be 10 wide with a 2 wide welt and approximately 7 deep. Pocketing shall be made of shell material for extra strength. There shall be one chest pocket on the black side with a flap. This shall be 3-1/2 wide and 6 tall. The flap shall be 3-1/2 wide and 2 tall. COLLAR: There shall be shirt style collar made of shell material. The color on each side shall be black. SLEEVES: Shall be one piece, set-in style. There shall be snaps at the end of the sleeve to adjust the opening of the sleeve. HOOD: There shall be a removable hood with a visor and draw cord with cord locks. AIR VENTS: There shall be three (3) eyelet holes under the arm pits for breath ability. INTERLINING: There shall be a non-woven interlining inside the collar, pocket welts, pocket flap and under the front snaps on both sides. SEWING/SEAMS: Seams on the black side shall be lap seams, double stitched. Seams on the Fluorescent side shall be single needle stitched and taped (seam sealed) to be 100% waterproof. FINISHING: This garment shall be finished in a first class workmanlike manner with all loose threads removed. The omission or apparent omission of any wording or specifications shall mean that only the highest quality industry standards shall be used on all fabric and component parts including labor. Where there may be a discrepancy between the standard sample and the written specification, the detail of the standard sample shall prevail.